Announcement

Collapse
No announcement yet.

3D printed pod and boom glider

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

    3D printed pod and boom glider

    hi my name is Dave or Dpot and i have a design for a gilder to start you in 3d printing and my be your first model or even a project for a school to get them thinking happy to help if need .

    well it is a pod and boom the pod is printed in 7 parts and the boom is a piece of aluminium tubing with a v tail it is powered with a brushless motor and needs a 3 cel 2200 Lipo 20 to 40 amp speed controller the wing can be foam or build up tail is from balsa.
    so her are sum images and i am new to this forum and not sour how to put it all to gather so her go's and my spieling is not that good.

    Click image for larger version

Name:	plan +3d model.png
Views:	3
Size:	102.8 KB
ID:	2886Click image for larger version

Name:	image_1390.jpg
Views:	2
Size:	112.7 KB
ID:	2867Click image for larger version

Name:	image_1391.png
Views:	1
Size:	65.9 KB
ID:	2868Click image for larger version

Name:	image_1392.png
Views:	1
Size:	51.6 KB
ID:	2869
    Attached Files
    Last edited by dave potter; 04-29-2021, 11:56 AM.

    #2

    Comment

    Working...
    X