Announcement

Collapse
No announcement yet.

Print onto balsa sheet

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

    Print onto balsa sheet

    Can anyone suggest a printer that prints onto balsa, up to 2mm thick.

    #2
    You can use t-shirt transfers. the parts are printed onto the transfer and then iron it to the balsa and peel off the transfer.

    Comment


      #3
      An Epson printer with "stock" Claria ink will work. WalMart has several types of T-shirt transfer paper..........application will depend on the paper selected but a home iron set to cotton with no steam should get the ink hot enough to transfer to the balsa. Disclaimer.....I did this on aircraft plywood and it worked just fine using a professional heat press.....I would be concerned about warping the balsa..........perhaps I should find some of my stored balsa and test it...........

      Comment

      Working...
      X